| SKU | EA165 |
|---|---|
| Applications | For use on: bottling & packaging equipment, tanks, pipes, valves, fittings, motor housings, metal casting, fences, parking meter posts, guard rails, playground equipment, agricultural equipment, construction equipment. For use by: municipalities, utilities, factories, industrial plants, refineries, fleet operations, chemical plants, paper mills, shipyards, A/C companies, equipment over haulers. |
| Directions | 1. For best results, workpiece and can should be at room temperature (above 65°F.) 2. Surfaces must be clean, dry and free of grease, dirt and oil. Remove loose rust and paint with coarse sandpaper or a wire brush. 3. Before using, shake can until ball rattles freely for at least one minute. Holding the can 8 to 10 inches from the surface, spray a thin, even coating onto the rusted metal. Avoid over application, sagging and dripping. In some cases, a second application may be useful to insure complete coverage and treatment. Wait until the first coat is completely dry before making a second application. A second application may not necessarily cause the surface to darken further. May be painted after final application has cured for approximately 6 hours. |
| Ingredients | Ethyl Alcohol (64-17-5), Liquefied Petroleum Gas (68476-85-7), Propylene Glycol Monomethyl Ether (107-98-2), and Tannic Acid (1401-55-4). |
| NFPA Ratings | Health: 1; Flammability: 3; Reactivity: 0; Personal Protection: B. |
| Packaging | Aerosol, 16-11 oz can, 12 per case. |
| Techical Data | Click here for Technical Data Sheet. |
| Product Label | Click here for Product Label. |
| Material Safety Data Sheet | Click here for MSDS. |
Stainless Steel Coating (12 per case)
$274.00
|
